160L/42.26Gal Aquarium Chiller, 1/10HP Low Noise Fish Tank Water Cooler with Special Quiet Design Refrigeration Compressor ＆ Water Tube for Axolotl Coral Jellyfish (160L/42.26Gal)

How to Install1. Cut the pipe into two parts and connect the pipes with two interfaces.2. Install the pump in series between the water cooler and the fish tank.3. Put the temperature probe into water.4. Start setting the temperature.How to Use1. Open the package, take out the product, and install it.2. Turn on the power supply of the circulating equipment and make sure that the water in the fish tank begins to circulate, and check whether there is water leakage.3. Turn on the water cooler, plug in the power plug, press the power switch to turn on the power, and the temperature of the fish tank will be displayed on the display screen.4. To set the temperature, press the set key(set the shutdown temperature), heating key, or cooling key to adjust to the appropriate temperature. (Press the “Ret” key after setting or return to the current temperature automatically after about 10 seconds).5. Press the “Set” key for a long time to display the “FI” return difference code(shutdown temperature plus return difference temperature is equal to the starting temperature)and set the heating key or cooling key to adjust to the appropriate temperature.SpecificationColor: BlackMaterial: Sheet MetalProcesses: Paint BakingShape: SquareStructure Type: Electronic RefrigerationProject Type: Low Temperature ChillerType: Inline ChillerWater Type: All Water TypesPlug Type: 3 Feet Flat Plug Screen Type: Digital Tube Code Display ScreenAssembly Required: YesMount Type: Free Standing, PumpModel: YSZY-02Voltage: AC 220-240V 50-60HzPower: 200WNumber of Items: 1Temperature Setting Range: 10-40 °C/50-104℉Applicable Inner Diameter of Water Pipe: 8mm/0.31inchSuitable for Water Flow: 1-3L/min/42.27-126.8oz/minSuitable for Lift: Less than 3m/9.84ftPower Cord Length: 1.5m/4.92ftTemperature Control Probe Line Length: 2m/6.56ftSuitable Capacity: 60L/15.85gallonNet Weight: 4.5kg/9.92lbsGross Weight: 5kg/11.02lbsPackage Size: 39*21.5*29cm/15.35*8.46*11.42inchProduct Size: 30*14*21.5cm/11.8*5.5*8.46 inchPackage Included1* 60L Aquarium Water Chiller1* Power Cord1* Water Tube1* Chinese ManualOther Accessories for InstallationNotes1. If the fan cannot rotate, please check the parameter settings of the chiller. You should keep the target temperature and temperature difference within a certain range to ensure that the chiller can operate normally.2. If the product cannot cool the water, please check the temperature probe first, and the probe should be completely placed in the water. The cooling effect is closely related to the water volume and room temperature. You can provide us with detailed information on your needs for further suggestions.3. If the product starts and stops working at an incorrect temperature, rather than based on the set temperature, it may be a malfunction of the temperature controller. If this problem occurs, please replace it with a new controller4. Please note that this product must be used with a water pump and installed directly in the middle of the water circulation pipe. Please make sure that the water pipe and the inlet and outlet pipes are well connected without water leakage5. Please be careful during transportation, installation, maintenance, and other processes, and maintain a distance of 20 centimeters/7.87 inches or more between the machine and the surrounding space to facilitate cooling airflow. Please pay attention to placement and usage requirements to ensure safe use.6. Please note that this item is not suitable for soilless cultivation or hydroponics. For soilless cultivation or hydroponics, at least 300L/79.25gallon are required. 7. Please note that this product does not come with a compressor or water pump.8. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

• Selected Material: The sheet metal shell with baking paint process and internal pure titanium evaporator ensure effective corrosion resistance of the chiller while achieving effective heat exchange. Whether it is freshwater or salt water, it can fully meet the sensitive temperature needs of aquatic organisms.
• Quick Temperature Control: With an efficient compressor and r134a refrigerant, the water temperature can be controlled within the ideal range in a short period. It can monitor the water temperature in real-time, helping the fish tank to automatically maintain a constant temperature.
• Easy to Operate: A clear LED screen displays the current temperature, and you can adjust the temperature in units of 0.1°C between 50°F and 104°F using simple buttons to select the most suitable temperature for your aquatic life according to different situations. The power outage memory function also provides convenience for you.
• Low Noise: It is equipped with a pure copper compressor, which greatly reduces the noise while ensuring work efficiency, only around 40-50 decibels. If you place it in the living room, these sounds are acceptable and will not affect normal life.
• Quick Heat Dissipation: The machine is equipped with a built-in fan and a large number of heat dissipation holes on the side, providing a powerful ventilation function, effectively dissipating compressor heat, and ensuring efficient operation of the compressor all day without overheating.