18HP 2 Stroke Outboard Motor Gas Powered Boat Engine, 246CC Heavy Duty Tiller Control Long Shaft Outboard Motors with Water Cooling & CDI System for Kayaks, Canoes, Inflatable Boats

SpecificationsMaterial: Aluminum AlloyModel: 18HP Horsepower Long ShaftDisplacement: 246CCGear Ratio: 2.1 (27:13)Number of Cylinder: 2Speed: 4500-5500RPMGear: F-N-RFuel Type: 92 Unleaded GasolineOil Tank Capacity: 24L (6.34Gal)Load-bearing Capacity: 500-1000kg (1102-2204lb)Ignition System: CDICooling System: Water CoolingControl System: Tiller ControlStart System: Manual StartPropeller Size(LxDia.): 23.5x20.3cm (9.3x8in)Suitable Stern Plate Height: 45cm-55cm (17.7x21.7in)Cylinder Diameter x Stroke: 56x50mm (2.2x2in)Recommended Engine Oil: 2 Stroke Engine OilMixing Ratio: 50:1 (Fuel: Oil)Trim and Tilt System: Manual TiltNet Weight: 41kg (90.4lb)Item Size: 87.3x33.2x117cm (34.5x13.1x46.1in) Package Includes1x Outboard Motor1x Flameout Rope1x Oil Pipe1x Sealing Ring1x Paper Pad1x Spark Plug1x Start Rope1x Water Pump Impeller1x Cotter Pin1x Fuel Tank1x User ManualOther ToolsNote1. The 2-stroke outboard must use a mixture of No. 92 gasoline and 2-stroke engine oil.2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1.3. After the running-in period, the volume ratio of gasoline and oil is 50:1.4. Gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank.5. The outboard motor must be started in water, do not start the engine on shore.6. Loosen the vent screw on the fuel tank cover counterclockwise when starting.7. The running-in period is about 10 hours or a month, and during the running-in period, do not drive with a high accelerator.8. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about 6 months. Gear oil is not filled before each machine leaves the factory, so please fill gear oil when using for the first time.

• 【Wide Applications】- VONZOER Gas boat motor 2 stroke is suitable for small ships(width less than 4.9feet, length less than 19.7inch) of various materials, such as inflatable boats, plastic boats, iron boats, fiberglass boats and wooden boats. It is widely used in fishery, aquaculture, outdoor adventure, etc.
• 【Sturdy & Durable】- This long shaft boat motor is made of premium aluminum alloy and plastic with painting process, which is sturdy and high impact-resistance, and can withstand saltwater. Many cooling holes and water cooling system help to dissipate heat effectively and extend its service life.
• 【Superior Performance】- 18HP High power and 5500rpm high speed provide strong power to ensure the motor can run smoothly and efficiently on most ships, max. load-bearing capacity of 2204lbs, strong to use. 246CC Displacement, 6.34Gal oil tank, strong thrust, low noise. The streamlined 3-blade propeller can conquer huge water resistance.
• 【Flexible Operation】- Manual pull-start, with a speed switch on the handle; Forward, neutral and reverse gears, and 360° steering function make it easy to control the direction of the boat; Stepless speed and constant speed cruise function make it easy to adjust the running speed and stable navigation at a constant speed.
• 【Details Design】- Its long(20inch) non-slip handle is easy to grasp; The silencer cover can absorb the noise generated by the fan through the internal sound-absorbing material; The anti-swirl plate can effectively reduce the turbulence of the waves and avoid water-wetting clothes.