20 Dies Watch Press Set, Watch Press Back Press Machine Screw Case Cover Press Watch Repair Pressing Tool for Watch Repairing, Compatible for Various Kinds of Watch

Features: 1. Both upper and lower are M6 threads, compatible for 5500A/5500C 2. Great for closing your watch case after resizing or repair job. 3. You can press the tool by tightening the top handle, which means you have full control over the pressure used. 4. It is easy to break the watch with other tools while you feel it prefect to close case with our tool. 5. Face down configuration means the repair person sees the case back being closed. Specification: Material: Stainless Steel + Aluminium Color: Shown As PicturesPress Tool Size: Approx.10 x 12 x 20cm/3.94 x 4.72 x 7.87in Round Size: 18/20 21/23 24/26 28/30 31/32 33/34 36/38 40/42 44/4648/502 Round Dies: 16/16 20/25mm Square Size: 20 25 30 35 40 45mm Size: 37 45mm Weight: 1620g Type: Repair Tools & Kits Package List: 1 * Clock gland tool 20 * Mold Note: The measurement error is about 2 mm, thank you for your understanding. There is an error in the size of manual measurement, thank you for your understanding. Instructions: 1. Choose a die which is bigger than the watch crystal and install it at screw-socket of under pliers. 2. Choose other die which is smaller than the rear cover and install it at screw-socket of up pliers. 3. Put a watch crystal adown at the under die and put the rear cover at a suitable position. 4. Lightly press down. 5. Putting a cloth under the watch crystal will protect the watch crystal.

• WIDELY USED WATCH CASE CLOSER: The upper and lower screws of the watch capping machine are M6 threaded, compatible with the 5500A / 5500C, and are widely used in various types of watches, which are very compatible and practical.
• GOOD STABILITY: The watch repair kit is made of Stainless Steel + Aluminium material, it can be quickly and effectively disassembled and repaired with helps to suppress the crystal and watch fix the watch, not It can cause scratches and marks on the dial and the watch cover, making it ideal for closing the case after resizing.
• WITH 20 DIES PRESSING REPAIR: The watch capping machine is equipped with 20 different watch dies, which are: Round size: 18/20; 21/23; 24/26; 28/30; 31/32; 33/34; 36/38; 40/42; 43/45; 48/50mm. 2 round dies: 16/16mm; 20/25mm. Square size: 20/ 25/30/35/40/45mm. size: 37/45mm. Can meet the size requirements of a wide range of watches.
• EASY TO USE: Apply pressure by tightening the upper handle, which means you have complete control over the pressure used. You can use enough pressure to mount the watch crystal or the bottom. The face down configuration indicates that the service personnel can see that the back of the case is closed.
• INSTRUCTIONS: Choose a die which is bigger than the watch crystal and install it at screw-socket of under pliers. Choose other die which is smaller than the rear cover and install it at screw-socket of up pliers. Put a watch crystal adown at the under die and put the rear cover at a suitable position. Lightly press down. Putting a cloth under the watch crystal will protect the watch crystal.