4 Inch PLC HMI All in One Integrated Programmable Logic Controller, FX1S-20MR with 12 Input 8 Relay Output, Built-in 2AD and 2DA, 2 Temparature NTC10K, 2 High Speed 100KHz (F420-FX-B)

4 Inch PLC HMI All in One Integrated Programmable Logic Controller, FX1S-20MR With 12 Input 8 Relay Output, Built-In 2AD and 2DA, 2 Temparature NTC10K, 2 High Speed 100KHz (F420-FX-B) Please download the User manual / HMI Software / USB Driver / Tutorial / Diagram : https:// drive.google.com/drive/folders/1N4nXlDS_wumzx0K0zZJURaIR--garByl?usp=sharing Attention: 1. pls disconnect the download USB cable when read the value of AD, DA and temparature NTC10K probe value 2. temparature NTC10K probe range is -50 -150 °， B3435 model. 3. HMI Choose F serials, model no. is 420, choose FXCUP in PlC type 4. Pls disconnect the download cable when read the AD DA and NTC10K value, or cannot read it. --- PLC Type: Fully compatible with FX1S, 12 Input (NPN Type) 8 Relay Output. 2 channel X0 X1 high speed input 100KHz to control Encofer. Have additional 4 Transistors Output: 2 channels Y0 Y1 high speed puls 100kHz to drive 2 servos or 2 steppers. Pulse single is 5V not 24V --- Built-In 2 Analog input (0-10V) and 2 analog output (0-10V), 2 channels for temparature NTC10K B3435 probe, can read the teamparature from register address directly -- PLC Software: Use GX Workers 2 or Developer (pls download from GX Workers 2 website, we only have Chinese version), support Command + T Ladder Diagram + SFC for programming -- HMI Softare: YKBuilder V5.3 Very easy to use this configuration software (Pls contact us, we will share it and the video instruction and guidelines) -- Project dowload: Use the same Cable for download program from PC to PLC/HMI: Use the mini port – USB cable, pls install HMI & PLC’s USB driver which we will share with you Packing List: 1 X HMI PLC All In One 1 X Cable for PLC and HMI program download 2 X Pulse cable to connect for PLC and Servo or Stepper's driver 4 X Buckles Attention: Pls contat us for all the software and user manuels, we will give fully support.

• --- PLC Type: Fully compatible with FX1S, 12 Input (NPN Type) 8 Relay Output. 2 channel X0 X1 high speed input 100KHz to control Encofer. Have additional 4 Transistors Output: 2 channels Y0 Y1 high speed puls 100kHz to drive 2 servos or 2 steppers. Pulse single is 5V not 24V
• --- Built-In 2 Analog input (0-10V) and 2 analog output (0-10V), 2 channels for temparature NTC10K B3435 probe, can read the teamparature from register address directly
• -- PLC Software: Use GX Workers 2 or Developer (pls download from GX Workers 2 website, we only have Chinese version), support Command + T Ladder Diagram + SFC for programming
• -- HMI Softare: YKBuilder V5.3 Very easy to use this configuration software (Pls contact us, we will share it and the video instruction and guidelines)
• -- Project dowload: Use the same Cable for download program from PC to PLC/HMI: Use the mini port – USB cable, pls install HMI & PLC’s USB driver which we will share with you