OREGON 73LPX084G 84 Drive Link Super 70 Chisel Chain, 3/8-Inch

The Oregon 73LPX084G PowerCut 24" Saw Chain is ideal for woodcutting professionals using 3/8" pitch saws. This .058" gauge chain has a low kickback feature and full chisel cutters which offer top performance. Offset depth gauges make cuts smoother by preventing the cutters from driving into the sidewall of the cut. This chain fits several chainsaw models including Husqvarna Jungle 3120, L Series, 455 Rancher and 576XP Auto Tune. Replaces many OEM parts, including but not limited to the following: Stihl - 35RS3 84, Husqvarna - H42 84, Husqvarna - 501 84 14-84. Fits many models, including but not limited to the following: Dolmar - 109, Dolmar - 112, Dolmar - 114, Dolmar - 116, Dolmar - 117, Dolmar - 119, Dolmar - PS-460, Dolmar - PS-5100S, Dolmar - PS-5105, Dolmar - PS-5105H, Dolmar - PS-540, Dolmar - PS-6000i, Dolmar - PS-6100, Dolmar - PS-6100H, Dolmar - PS-6400, Dolmar - PS-6400H, Dolmar - PS-6400W, Dolmar - PS-7300, Dolmar - PS-7300H, Dolmar - PS-7300W, Dolmar - PS-7310, Dolmar - PS-7310H, Dolmar - PS-7900, Dolmar - PS-5100SH, Dolmar - PS-7900W, Dolmar - PS-7910, Dolmar - PS-7910H, Dolmar - PS-7910W, Dolmar - PS-7910XD, Dolmar - PS-9010, Dolmar - PS9000, Dolmar - PS-9010FL, Dolmar - 113, Dolmar - 120, Efco - 156, Efco - 956, Efco - 962, Efco - MT 7200, Efco - MT 8200, Husqvarna - 1100, Husqvarna - 160, Efco - 181, Husqvarna - 181, Husqvarna - 185, Husqvarna - 2100, Husqvarna - 2101, Efco - 165, Husqvarna - 254, Husqvarna - 257, Husqvarna - 260, Husqvarna - 261, Husqvarna - 262, Husqvarna - 262XP, Husqvarna - 266, Husqvarna - 268, Husqvarna - 272, Husqvarna - 281, Husqvarna - 285, Husqvarna - 288, Husqvarna - 288XP Lite, Husqvarna - 298, Husqvarna - 3120, Husqvarna - 3120XP, Husqvarna - 355, Husqvarna - 357, Husqvarna - 357XP, Husqvarna - 357XPG, Husqvarna - 359, Husqvarna - 359E-TECH, Husqvarna - 360, Husqvarna - 362, Husqvarna - 365, Husqvarna - 371, Husqvarna - 372, Husqvarna - 372XP, Husqvarna - 162, Dolmar - 118, Husqvarna - 380, Husqvarna - 385

• Recommended saw size: 50 to 100cc, bar length: 16"-36" (41-91cm)
• Standard sequence: 72lpx: 3/8" pitch, .050" gauge; 73lpx: 3/8" pitch, .058" gauge; 75lpx: 3/8" pitch, .063 gauge
• X grind-enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes
• Blued cutters provide superior corrosion resistance
• Warning: oregon 72l, 73, and 75lpx super 70 chains may be capable of kickback that could result in serious injury to the saw operator or bystanders